- 205W x 9ch high quality discrete power amplifier for powerful and detailed sound
- Monolithic amplifier design with Denon custom made transistors
- D.D.S.C.-HD Digital and AL24 Processing Plus; Denon Link HD
- Built-in WiFi with dual diversity antenna, built-in Bluetooth
- 11.2ch processing; 13.2ch pre-out; 3 multiroom zones
- Built-in Dolby Atmos (up to 7.1.4, 9.1.2 with external 2ch amplifier); DTS:X ready (via future firmware update)
- Auro-3D upgradeable (up to 10.1ch with external amplifier; a fee is charged)
- Latest HDMI standard with 4K/60Hz full-rate pass-through on all inputs, 4:4:4 resolution, HDR, BT2020
- 8 HDMI inputs (1x front) and 3 HDMI outputs with full HDCP 2.2 support
- Advanced Video Processing with scaling of lower resolution signals up to 1080p and 4k Ultra HD
- Wide support for streaming formats including high resolution DSD, FLAC and AIFF
- AirPlay and DLNA music streaming; Spotify Connect (where available); Internet Radio
- Audyssey MultEQ XT32 (Pro ready), Sub EQ HT and Audyssey LFC; Audyssey Dynamic Volume and Dynamic EQ
- Gold-plated terminals
- Setup Assistant in 9 languages; Easy to setup, easy to use
- Advanced ECO mode with off/on/auto setting
Enjoy a striking surround sound audio experience with the Denon AVR-X6200W, which features Dolby Atmos and DTS:X surround decoding. Both Dolby Atmos and DTS:X feature object-based surround sound with the ability to drive overhead speakers to deliver the ultimate immersive 3D audio experience. With an advanced video processing and switching section, the AVR-6200W features full 4K Ultra HD connectivity, HDMI ver 2.0a and HDCP 2.2 compliance.
The powerful amplifier section features custom made discrete monolithic amplifiers with DHCT (Denon High Current Transistors). Rated at 205 watts per channel, the AVR-X6200W has the ability to drive lower impedance 4 ohm speakers on all channels.
Equipped with built-in Wi-Fi and Bluetooth with dual diversity antennas, the AVR-X6200W lets you listen to your favourite music from streaming services including Spotify Connect, and you can listen to any of thousands of internet radio stations. You can also stream your favourite tracks wirelessly from your iPhone, iPod touch and iPad via AirPlay.
Built-in Bluetooth & Wi-Fi
Featuring Bluetooth & Wi-Fi wireless streaming connectivity, the AVR-X6200W is equipped with an advanced dual antenna RF transceiver system for robust and error-free streaming, even in congested urban environments. Connect to the internet through your home Wi-Fi network (or with a hard-wired connection via the RJ-45 Ethernet LAN port) and enjoy your favourite tracks from streaming music services such as Spotify Connect. You can also choose from thousands of internet radio stations around the world, and enjoy music from virtually every genre. With AirPlay, you can enjoy listing to your favourite tracks wirelessly from your iOS device, including the iPod touch, iPhone and iPad, and the AVR-X6200W is also DLNA 1.5 certified for compatibility with your home PC or Mac. The Denon AVR Remote App lets you easily control the AVR-X6200W with your favourite portable device and it’s available for both Apple and Android devices.
Latest HDMI Connectivity; HDCP 2.2 Compatible; Video Scaling; ISF Certification
Equipped with 8 HDMI inputs, including 1 conveniently located on the front panel, along with three HDMI outputs, the AVR-X6200W incorporates an advanced video processor that features support for 4K Ultra HD 60 Hz full rate video, 4:4:4 Pure Color subsampling and 21:9 video pass-through, along with support for 3D content, HDR and BT.2020. The AVR-X6200W also features HDCP 2.2 compatibility on all HDMI inputs, a requirement for 4K Ultra HD copy-protected content. And, the video processor can also upscale analogue and digital SD and HD video to 4K Ultra HD. Certified by the Imaging Science Foundation, the AVR-X6200W features a full suite of video calibration controls (for use by an ISF technician), along with ISF Day and ISF Night video modes.
Dolby Atmos Built-In; DTS:X Ready
Dolby's new Atmos surround sound technology dispenses with channel-based coding in favor of more advanced object-based coding, giving the sound designer the ability to precisely place sounds anywhere in the 3-dimensional space. Now, you can enjoy this same award-winning technology at home with the AVR-X6200W, which features the ability to connect a 5.1 surround sound speaker system and 4 additional overhead speakers or 4 additional Dolby Atmos elevation speakers for the ultimate home theater experience. Thanks to the 11ch processing capability, you can just add an external 2-channel amplifier and even enjoy a thrilling 7.1.4 or 9.1.2 channel Atmos experience. Along with Dolby Atmos decoding and Dolby Surround Upmixing, the AVR-X6200W also features Dolby TrueHD lossless decoding and other Dolby Digital technologies.
The latest immersive surround sound system, DTS:X, features object-based audio coding that lets the sound designer place sonic elements anywhere in the 3D acoustic soundspace, and provides for overhead speakers to deliver a stunning surround sound experience, and the AVR-X6200W also features DTS-HD Master Audio and other DTS technologies. DTS:X and DTS Neural:X Upmixer will be enabled through a future online firmware update.
By fully immersing the listener in a cocoon of life-like sound, Auro-3D puts you right in the middle of the action. Auro-3D provides an immersive surround sound experience thanks to dedicated height and overhead channels, in addition to the regular channels. The height information, captured in recording or created during the mixing process, is mixed into a standard 5.1 PCM stream that comes with a regular Blu-ray. Moreover, the Auro-3D Engine combines different technologies to guarantee an optimum 3D sound experience generated both natively and from existing audio content. It recognizes mono, stereo, 5.1 surround or an Auro-encoded signal and transforms them into 3D audio. Once upgraded with the Auro-Codec decoder, the Denon AVR-X6200W is capable of decoding the original Auro-3D mix and playing back an Auro-3D 10.1 channel configuration (with external amplifier). Upgrade for the AVR-X6200W is now available
Powerful 9 Channel Discrete Amplifier with Eco Mode
With each channel rated at a maximum power of 205 watts, the AVR-X6200W features a monolithic power amplifier design with Denon custom made transistors and identical circuit topology on all 9 channels. Our new Eco Mode provides the ability to reduce overall power consumption and features an on-screen Eco Meter that lets you see the power consumption reduction effect. The Auto Eco mode automatically switches between normal and Eco modes, depending on the volume level chosen, and the power amplifier block is rated to drive low impedance speaker loads, down to 4 ohms, for compatibility and stability with virtually any loudspeaker model.
In order to properly handle the multitude of advanced digital audio decoding and processing functions, the AVR-X6200W features an sophisticated DSP audio processing system that incorporates no less than 4 powerful high speed fourth generation SHARC DSP processors, which together have a combined continuous processing capability of 10 GFLOPS (10 billion floating point numerical computations per second).
Audyssey MultEQ XT32 (Pro ready)
The AVR-X6200W features the Audyssey MultEQ XT32 suite of DSP functions, which includes room equalisation, Dynamic EQ and Dynamic Volume. Audyssey MultEQ XT32 automatic room acoustic measurement and correction system matches your speakers to your room’s acoustics, for the smoothest, most natural tonal balance. Audyssey Sub EQ HT allows proper integration of two subwoofers in their home theater systems for rich, full bass that covers a wide listening area. Audyssey Dynamic EQ uses advanced psychoacoustic algorithms to continually adjust tonal balance so that the sound you hear is full range, even at lower volume levels, and Audyssey Dynamic Volume smoothes out annoying volume jumps, especially with loud commercials. Audyssey LFC prevents bass from passing your walls and disturbing your neighbours while maintaining the bass performance in the listening room. The AVR-X6200W is also Audyssey Pro ready for the most advanced professional room correction.
Denon Link HD; AL24 Processing Plus
When connected to a compatible Denon Blu-ray player, our exclusive Denon Link HD system provides a dedicated pathway for the critical timing data to eliminate distortion caused by jitter errors in the main data stream. Denon’s exclusive AL24 audio processing provides ultra high resolution digital audio filtering and precision tailoring of the main (L/R) audio channels, to deliver shimmering detail in the highs, along with smooth natural midrange and a broad soundstage with improved imaging.
|Amplifier power (watts)||9 x 205W (6 ohms)|
6 x line in (via 2 x RCA/phono)
1 x phono in (via 2 x RCA/phono)
2 x audio subwoofer pre-out
13.2 channel pre-output
Zone2 pre-out (via 2 x RCA/phono)
Zone3 pre-out (via 2 x RCA/phono)
Aux in (via 2 x RCA/phono)
Headphones out (via 6.3mm jack)
|Auto microphone/room calibration||Yes|
|DAC/Digital bits||High-performance 192kHz/24-bit D/A converters for all channels|
|Digital audio||2 x optical in (via toslink)
2 x coaxial in (via RCA/phono socket)
|Extra||Denon’s proprietary Compressed Audio Restorer, to restore sound quality from compressed music sources.
Denon Remote App for iPhone, iPod Touch and iPad (available in AppStore)
Audyssey MultiEQ-XT32 PRO
Audyssey Dynamic EQ for Loudness Correction
Audyssey Dynamic Volume to Maintain Optimal Listening Level and Dynamic Range
Audyssey LFC for Low Frequency Control
|Finish||Black or Silver|
|Key decoding||Dolby: Atmos, Digital EX, TrueHD, Pro Logic IIx,
DTS: DTS ES, DTS-Neural:X, DTS 96/24, DTS-HD Master Audio
|Networking||Wired (Ethernet) or wireless networking allows connection to Internet radio stations and streaming of music from compatible computers, NAS drives and DLNA certified devices. Apple Airplay allows streaming of music stored on iPod/iPhone or iPad over a wireless or wired network*
*Note the receiver must be connected to the same network as Airplay device (e.g. via a wireless router)
|Number of channels||11.2|
|Speaker outputs||11 speaker terminals for height/wide/B speakers|
|Supplied accessories||Remote Control, set-up microphone, FM & AM antennas, Speaker cable stickers|
|Tuner||FM/AM (with RDS & RadioText)
|Video/Audio inputs & outputs||REAR
7 x HDMI in (supports HD 1080p & 3D video)
4 x composite video in (via RCA/phono)
2 x composite video out (via RCA/phono)
2 x component video in (via 3 x RCA/phono)
1 x component video out (via 3 x RCA/phono)
3 x HDMI out (Audio Return Channel on Monitor 1 output)
FM & AM antenna sockets
2 x WiFi/Bluetooth antenna socket
Denon Link HD socket
IR in and out (for connection of compatible infrared receiver)
2 x Trigger out
Network connection (via RJ45)
1 x HDMI in
USB socket with Direct play for iPod and iPhone
Aux video in (via RCA/Phono)
|W x H x D (mm)||434 x 167 x 393 (Horizontal antenna)
434 x 235 x 393 (Vertical antenna)
434 x 167 x 383 (Without antenna)
Seen the Denon AVRX6200W 9X 205W Full 4K Ultra HD Network A/V Receiver With Wi-Fi, Bluetooth Cheaper?
We check our prices every day to ensure we can bring you the best price possible. In the unlikely case that you have found a cheaper price then please contact us on firstname.lastname@example.org and we'll do our best to answer your query right away! or call us 02082086999