Technics SL1210GR Direct Drive Turntable - Black

Technics SL1210GR Direct Drive Turntable - Black

Key Features:

  • Direct drive turntable

  • Turntable speeds: 33 1/3, 45, 78 RPM

  • Adjust range: ±8%, ±16%

  • Dust cover and headshell supplied

    view all TECHNICS products

    £1,299.00

    code: 300025304

    In Stock Free Delivery 3-5 working days

    Last 1 left!

    Model:SL-1210GR

    EAN:5025232858736

    Seen it Cheaper?

    Request a pricematch now!

    The direct-drive turntable invented by Technics is still highly acclaimed by audiophiles and DJs in the form of the SL-1210 series, and there have been many requests to revive the turntable system. As such, Technics decided to develop a new system for Hi-Fi use.

    In 2016, Technics developed the twin-rotor, surface-facing, coreless direct-drive motor with rotor magnets placed on both sides, eliminating the rotation irregularity of the motor, referred to as "cogging," which was a unique issue for direct-drive systems. This motor was adopted for the SL-1200G, which once again drew a significant response in the hi-fi market. The SL-1200GR inherits the same design philosophy with the new development of a single-rotor, surface-facing, coreless direct-drive motor, resulting in the elimination of cogging

    The SL-1210GR’s rotation control, which verifies and corrects the precision of the motor, uses the latest motor control technology cultivated in the development of Blu-ray devices, just as that used by the SL-1200G. In addition, the electrical circuitry has been tuned to ensure the newly developed motor of the SL-1210GR achieves maximum performance

    The platter achieves high-rigidity and vibration-damping characteristics by using a two-layer construction with deadening rubber applied to the entire rear surface of the aluminum die-cast. This eliminates the unnecessary resonance that is otherwise relayed to the record, thereby producing clear sound

    To increase the inertial mass and to reduce vibration, the shape of the aluminum die-cast portion was optimised by simulation. At 2.5kg (including the rubber mat), the SL-1200GR platter is 0.8kg heavier than that of the previous SL-1200MK5. Also, the back surface of the platter features strengthening ribs to improve rigidity. Increasing the surface area of contact with the deadening rubber achieves damping characteristics that are more than twice as good as those of the SL-1200MK5

    The tonearm tracks the rotation of the record and enables reading with high precision. The tonearm inherited by Technics is the traditionally used static-balance universal S-shaped tonearm, employing an aluminum pipe with excellent light weight and rigidity for the material of the tonearm pipe

    With it's gimbal suspension construction, the tonearm bearing section of the SL-1210GR uses a cut-processed housing that employs high-precision bearings, as in the SL-1200G. The high initial-motion sensitivity of 5mg or less is achieved through manual assembly and adjustment by skilled Japanese artisans. This enables the grooves etched into the records to be accurately traced

    Gold-plated phono terminals and ground terminals for detachable cables are provided below the tonearm, so a wide variety of cables can be selected. Also, the use of metal shielding construction inside the case reduces the effects of external noise

  • Direct drive turntable
  • Wow and Flutter: 0.025% W.R.M.S
  • Adjust Range: ±8%, ±16%
  • Starting Torque: 2.2 kg?cm
  • Build-up Characteristics: 0.7 seconds from standstill to 33 1/3 RPM
  • Rumble: 78dB (IEC 98A Weighted)
  • Outputs: 1 x phono output
  • Platter: aluminium die-cast high-dampening platter
  • Platter diameter: 332mm
  • Platter weight: approx 2.5kg including rubber sheet
  • Playback speeds: 33 1/3, 45, and 78 RPM
  • Universal static balace tonearm
  • Tonearm effective length: 230mm (overhang: 15mm)
  • Tonearm height adjustment range: 0 - 6mm
  • Stylus pressure adjustment range: 0 - 4g (direct reading)
  • Dust cover and headshell supplied (turntable cartridge is not supplied)
  • Headshell weight: approx: 7.6g
  • Dimensions of turntable (W x H x D): 453 x 173 x 372mm
  • Weight: 11.2kg
  • Finish: black
  • 1 year manufacturer's warranty
  • Only registered users can write reviews. Please, log in or register

    Seen the Technics SL1210GR Direct Drive Turntable - Black Cheaper?

    Price Match
    We're always competitively priced! However, on the odd occasion a competitor may offer a lower price on a product, all we ask is that the store or website offering the lower price is an authorised dealer for that brand and is based in the UK with the products being 'like for like' and available from stock. We will also take into account any delivery charges.

    * Required Fields